欢迎进入苏州金水机械制造有限公司官方网站!

PE PP清洗、回收造粒生产线(PE/PP Film Washing Line、Pelletizing Line)

19 19

产品名称: PE PP清洗、回收造粒生产线(PE/PP Film Washing Line、Pelletizing Line)

发布日期: 2019-05-27

点击数: 818

二维码:

简述:

产品详情

PE/PP 薄膜清洗线PE/PP Film Washing Line

该生产线采用欧洲设计,主要用于废旧 HDPE/LDPE/PP薄膜,编织袋 破碎,清洗,回收;整条生产线包括物料输送,金属检测,破碎粉碎(可带水),漂洗,高速摩擦清洗,离心脱水,干燥,物料收集包装等系统;

我公司具有专门为薄膜破碎而研制的薄膜破碎机,粉碎机能有效的将薄膜粉碎,提高产量,粉出的薄膜尺寸细小,有利于后面的清洗干净;产量高能节约人工河能耗;

同时可配备废旧薄膜打包机,薄膜包块剪切机,滚筒筛分系统(能有效将薄膜内部的泥沙,石块筛分出来,保护后面粉碎机刀片不受损伤)。干燥部分也可以配备本公司新产品薄膜挤干机(用于挤掉薄膜内部水份,能有效提高干燥度,省去电加热干燥系统,能有效节约用电)

We have many year experience in the waste Film.Sack and so on plastic Recycling machinery manufacturing; This production line adopt the Europe design with high quality. It used to recycling the waste HDPE/LDPE/PP film and sack. The production line including the conveyor belt, metal detector, Plastic crusher(its crushing with water, so can protect the knife and washing the material there),material floating, high speed frication washing, centrifuge dewatering machine, drying system and  material collecting,  We have special crusher,grinder machine for the film, sack, with special blades design and the mesh design; so the output material is samller size but capacity is higher; It will help the washing the material more cleaning;


And save labor cost and save energy; You also can choose use the shredder machine to reduction the material size, vits according to your requirement; if use the shredder, the blades will lasting longer time and save blades changing labor cost;This production line can come with the plastic baler machine, to produce the plastic bale easy for transportation.  
Also we have the hydraulic bale cutting machine, it can shearing the bale into smaller pieces. After the shearing we have the trommel machine use to screening out the inside sand, rocks from the material;In the end, can choose use our new designed machine, film squeezing machine; It can drying the material better but less power consumption;


Line Model/型号

ME-300

ME-500

ME-1000

Capacity/产量

300kg/hr

500kg/hr

800-1000kg/hr

Total Installed Power/装机总量

120KW

180KW

250KW

Water Consumption/耗水量

Better Use Cycle water

1-2T/hr

2-3T/hr

3-5T/hr

Labor Required/人工

1-2

2-3

3-5

Line length/生产线总长度

≈30

≈40

≈50

PE/PP压缩一体造粒线: PE/PP Film Pelletizing Line 

该生产线采用欧洲设计,技术先进, 主要用于干净的HDPE/PP 薄膜原材料,边角料和破碎,清洗,干燥后的 HDPE/LDPE/PP 料。 通过输送带将物料送入切割压实仓,通过切割压实仓的高速旋转将物料送入挤出机螺杆;该螺杆是专门为切割压实塑料造粒而设计的,具有进料快,耐磨损等优点,带有自然排气孔和抽真空系统; 能有效的将物料内部的水份排出;挤出机使用铸铝加热器,经久耐用;

切割压实仓能有效的将物料干燥,凝聚,摩擦自热将物料达到一定的温度后高速强制喂入螺杆,提高了产量以及减少了螺杆对塑料的加热量,加快了塑化进程;能有效的节约能耗;

挤出机上安装有液压换网器,能有效的将物料中的杂质去除;通过不同目数的滤网使用来生产不同质量的成品;机头部分特殊设计能有效排出物料内部隐藏的水份,提高造粒质量;

也可以配备使用双阶造粒系统,使用两个挤出机将物料经过二次过滤,使生产的粒子更干净,质量更高;

可以配备振动筛以便筛选出尺寸不合格产品;使得产品粒子尺寸均匀,美观。后续切粒方式可以选择拉条切粒方式,也可以选择磨面切粒方式(水环切粒方式)以节省人工,减少废料产生;

生产线可根据客户物料干净程度,成品质量要求来特殊设计; 



With the Agglomerating system to force feeding specially for the clean flim; This PE/PP Film Agglomerating Pelletizing Line adopt the Europe design, advanced technology; Its mainly for the clean HDPE/PP film material, sack material and for the crushed, washed, film material; It use the conveyor machine feeding material into the compactor with metal detector fixed on it; The compactor will cutting and agglomerating the raw material, and continuously feeding material into the screw with high   speed so the capacity is high; The screw and barrel is made by 38CrMnAlA mterial which is durable use; The extruder have air vent degassing system to outlet the humidity.   We  also have the vacuum degassing  system for optional choose(Its better for the humidity outlet). The extruder heating by the cast aluminum heater and cooling by blower, its durable use;
There is hydraulic screen changer installed on the extruder to filtering out the dirty. Its driven by the hydraulic system very fast and non-stop. Very convenient for the screen change; You can use different mesh screen to producedifferen quality granules;


You can use one extruder or two extruder for 2 times filtering. use two extruder will do one more time filtering so the output material will be better quality.

There are 2 different cutting model for choose: haul-off string cutting type, die face(water-ring) cutting system. Withthe die face cutting can produce more beautiful and uniform granules. Also it can save labor and generating less waste material; You can choose use the vibrating  screen  machine  to screening out bigger size material and blowing it back into extruderre-granulation. 

We can produce the machinery according to your special requirement: 

Model

型号

Screw Dia.  (mm)

螺杆直径

Screw  L/D长径比

Capacity (kg/h)

产量

  APL-100/100

100

25~33

200~300

100

8~10

   APL-130/130

130

25~33

400~500

130

8~10

    APL-160/160

160

25~33

500~600

160

8~10

 APL-180/180

180

25~28

800~1000

180

 8~10

 

(+86)0512-58523580
手机:13776276338
传真:(+86)0512-58537386
地址:江苏省张家港市兆丰工业园乐丰路
关注官方微信更多惊喜,
更多活动,扫一扫
0